| Home | Service & Repair | Hardware Sales | Consumables | Rental | Tel: 0845 0770 787 |
|
|
||||||
|
|||||||
|
|||||||
| DesignJet 1xx | DesignJet 4xx | DesignJet 800 | DesignJet 4000 |
| DesignJet 2xx | DesignJet 500 | DesignJet 1050 / 1055 | DesignJet 4500 |
| DesignJet 3xx | DesignJet 750 / 755 | DesignJet 2xxx/3xxx CP | DesignJet 5000 / 5500 |
| DesignJet 100, DesignJet 110, DesignJet 120, DesignJet 130 error codes | |||
| DesignJet 1xx error codes explained | Request a repair estimate | ||
| DesignJet 230 & DesignJet 250 error codes | |||
| To be advised | Request a repair estimate | ||
| DesignJet 330 & 350 error codes | |||
| To be advised | |||
| DesignJet 430, DesignJet 450, DesignJet 455, DesignJet 488 error codes | |||
| DesignJet 430 / 450 error | Cartridge + data + media error | Request a repair estimate | |
| Primary error code explained | |||
| DesignJet 500 error codes | |||
| DesignJet 500 01:10 error | Electronics module failure | Request a repair estimate | |
| DesignJet 500 01:11 error | Electronics module fan failure | Request a repair estimate | |
| DesignJet 500 01:12 error | EEROM not configured correctly | Request a repair estimate | |
| DesignJet 500 01:13 error | Electronics module failure | Request a repair estimate | |
| DesignJet 500 02:10 error | Carriage failure | Request a repair estimate | |
| DesignJet 500 02:13 error | carriage failure | Request a repair estimate | |
| DesignJet 500 03:10 error | Power supply failuer | Request a repair estimate | |
| DesignJet 500 04:11 error | LAN card not detected | Request a repair estimate | |
| DesignJet 500 05:09 error | Formatter or HP GL/2 card not detected | Request a repair estimate | |
| DesignJet 500 05:10 error | Formatter not detected | Request a repair estimate | |
| DesignJet 500 05:11 error | Formatter not detected | Request a repair estimate | |
| DesignJet 500 06:03 error | Formatter hard drive not functioning | Request a repair estimate | |
| DesignJet 500 08:11 error | Front panel not detected | Request a repair estimate | |
| DesignJet 500 11:11 error | Trailing cable defective | Request a repair estimate | |
| DesignJet 500 11:13 error | Printhead voltage: Possible trailing cable or carriage defective | Request a repair estimate | |
| DesignJet 500 12:11 error | Attempt to resolve by cleaning printheads or possible defective carriage | Request a repair estimate | |
| DesignJet 500 21:10 error | Service station failure | Request a repair estimate | |
| DesignJet 500 21:11 error | Attempt to resolve by firmware upgrade or possible defective s/stn | Request a repair estimate | |
| DesignJet 500 22:10 error | Ensure all inks are genuine HP or possible Ink supply station failure | Request a repair estimate | |
| DesignJet 500 41:10 error | Paper axis (X-Axis) motor failure | Request a repair estimate | |
| DesignJet 500 41:13 error | Paper axis motor encoder failure | Request a repair estimate | |
| DesignJet 500 42:10 error | Scan axis (Y-Axis) motor failure | Request a repair estimate | |
| DesignJet 500 43:10 error | Vacuum fan failure | Request a repair estimate | |
| DesignJet 500 43:11 error | Vacuum fan not detected | Request a repair estimate | |
| DesignJet 500 56:10 error | Drive roller encoder sensor failure | Request a repair estimate | |
| DesignJet 500 56:13 error | Drive roller encoder sensor failure | Request a repair estimate | |
| DesignJet 500 61:04 error | Firmware error, attempt to resolve by firmware upgrade | Request a repair estimate | |
| DesignJet 500 61:05 error | Communication problem, try new driver & different connection method | Request a repair estimate | |
| DesignJet 500 62:03 error | Parallel port communication error, call us to discuss | Request a repair estimate | |
| DesignJet 500 63:03 error | LAN card communication error, attempt firmware upgrade | Request a repair estimate | |
| DesignJet 500 64:03 error | USB port communication error, attempt firmware upgrade | Request a repair estimate | |
| DesignJet 500 64:04 error | USB port communication error, attempt firmware upgrade | Request a repair estimate | |
| DesignJet 500 65:03 error | Communication error, attempt firmware upgrade / driver upgrade | Request a repair estimate | |
| DesignJet 500 71:04 error | Formatter issue, attempt firmware upgrade | Request a repair estimate | |
| DesignJet 500 71:06 error | Out of memory, request quote for memory upgrade | Request a repair estimate | |
| DesignJet 500 72:04 error | Scan axis firmware error, attempt firmware upgrade | Request a repair estimate | |
| DesignJet 500 73:04 error | Servo error, Possible new electronics module | Request a repair estimate | |
| DesignJet 500 79:04 error | Firmware error, attempt firmware upgrade | Request a repair estimate | |
| DesignJet 500 81:01 error | Paper axis shutdown, possible defective encoder disk | Request a repair estimate | |
| DesignJet 500 81:11 error | Paper axis shutdown, possible defective encoder disk | Request a repair estimate | |
| DesignJet 500 85:10 error | Paper axis encoder error, possible defectice encoder/sensor | Request a repair estimate | |
| DesignJet 500 86:01 error | Carriage axis shutdown | Request a repair estimate | |
| DesignJet 500 86:11 error | Carriage axis shutdown | Request a repair estimate | |
| DesignJet 500 86:13 error | Carriage axis shutdown, attempt firmware upgrade | Request a repair estimate | |
| DesignJet 500 87:13 error | Possible defective carriage assembly | Request a repair estimate | |
| DesignJet 500 93:10 error | Ink system failure, check inks are ok & genuine HP, possible tubes assy | Request a repair estimate | |
| DesignJet 750 & DesignJet 755 error codes | |||
| DesignJet 750 010001 error | Window sensor defective, front panel required | Request a repair estimate | |
| DesignJet 750 010020 error | ROM test failure, possible main PCA | Request a repair estimate | |
| DesignJet 750 010021 error | DRAM failure replace main PCA | Request a repair estimate | |
| DesignJet 750 010022 error | Swath RAM failure, replace main PCA | Request a repair estimate | |
| DesignJet 750 010023 error | EEROM failure, clear EEROM / Replace main PCA | Request a repair estimate | |
| DesignJet 750 010024 error | Pen interface failure, replace main PCA | Request a repair estimate | |
| DesignJet 750 010030 error | Internal communication error | Request a repair estimate | |
| DesignJet 750 010032 error | Internal communication error | Request a repair estimate | |
| DesignJet 750 010033 error | Internal communication error | Request a repair estimate | |
| DesignJet 750 010034 error | Internal communication error | Request a repair estimate | |
| DesignJet 750 010040 error | X-Axis servo error | Request a repair estimate | |
| DesignJet 750 010041 error | Y-Axis servo error | Request a repair estimate | |
| DesignJet 750 010050 error | Defective Postscript SIMM | Request a repair estimate | |
| DesignJet 750 010060 error | Primer motor failure | Request a repair estimate | |
| DesignJet 750 010080 error | RS-232 data overflow | Request a repair estimate | |
| DesignJet 750 020001 error | Memory error, try turning off queuing & adding more RAM | Request a repair estimate | |
| DesignJet 750 020002 error | Memory error, try turning off queuing & adding more RAM | Request a repair estimate | |
| DesignJet 750 02002x error | Firmware error, replace Postscript SIMM | Request a repair estimate | |
| DesignJet 750 030010 error | Service station error | Request a repair estimate | |
| DesignJet 750 04xxxx error | MIO error, check MIO setup | Request a repair estimate | |
| DesignJet 750 040601 error | Incorrect MIO card | Request a repair estimate | |
| DesignJet 750 05xxxx error | MIO system error | Request a repair estimate | |
| DesignJet 750 06030A error | Mark Position not found, possible carriage assy | Request a repair estimate | |
| DesignJet 750 06030B error | Bad ambient temperature | Request a repair estimate | |
| DesignJet 750 060308 error | Problem with pen voltage | Request a repair estimate | |
| DesignJet 750 060309 error | Problem with pen voltage | Request a repair estimate | |
| DesignJet 750 070000 error | Unable to calibrate drop detect | Request a repair estimate | |
| DesignJet 750 070005 error | Calibration prioblem | Request a repair estimate | |
| DesignJet 750 070006 error | Calibration prioblem | Request a repair estimate | |
| DesignJet 750 070007 error | Calibration prioblem | Request a repair estimate | |
| DesignJet 750 070008 error | Calibration prioblem | Request a repair estimate | |
| DesignJet 750 070010 error | False drops detected, check your power supply is not noisy | Request a repair estimate | |
| DesignJet 750 070020 error | Drop detect error | Request a repair estimate | |
| DesignJet 750 070030 error | Drop detect error | Request a repair estimate | |
| DesignJet 750 070100 error | Firmware error | Request a repair estimate | |
| DesignJet 750 0000D8 error | Firmware error | Request a repair estimate | |
| DesignJet 750 080001 error | Postscript error | Request a repair estimate | |
| DesignJet 755 010001 error | Window sensor defective, front panel required | Request a repair estimate | |
| DesignJet 755 010020 error | ROM test failure, possible main PCA | Request a repair estimate | |
| DesignJet 755 010021 error | DRAM failure replace main PCA | Request a repair estimate | |
| DesignJet 755 010022 error | Swath RAM failure, replace main PCA | Request a repair estimate | |
| DesignJet 755 010023 error | EEROM failure, clear EEROM / Replace main PCA | Request a repair estimate | |
| DesignJet 755 010024 error | Pen interface failure, replace main PCA | Request a repair estimate | |
| DesignJet 755 010030 error | Internal communication error | Request a repair estimate | |
| DesignJet 755 010032 error | Internal communication error | Request a repair estimate | |
| DesignJet 755 010033 error | Internal communication error | Request a repair estimate | |
| DesignJet 755 010034 error | Internal communication error | Request a repair estimate | |
| DesignJet 755 010040 error | X-Axis servo error | Request a repair estimate | |
| DesignJet 755 010041 error | Y-Axis servo error | Request a repair estimate | |
| DesignJet 755 010050 error | Defective Postscript SIMM | Request a repair estimate | |
| DesignJet 755 010060 error | Primer motor failure | Request a repair estimate | |
| DesignJet 755 010080 error | RS-232 data overflow | Request a repair estimate | |
| DesignJet 755 020001 error | Memory error, try turning off queuing & adding more RAM | Request a repair estimate | |
| DesignJet 755 020002 error | Memory error, try turning off queuing & adding more RAM | Request a repair estimate | |
| DesignJet 755 02002x error | Firmware error, replace Postscript SIMM | Request a repair estimate | |
| DesignJet 755 030010 error | Service station error | Request a repair estimate | |
| DesignJet 755 04xxxx error | MIO error, check MIO setup | Request a repair estimate | |
| DesignJet 755 040601 error | Incorrect MIO card | Request a repair estimate | |
| DesignJet 755 05xxxx error | MIO system error | Request a repair estimate | |
| DesignJet 755 06030A error | Mark Position not found, possible carriage assy | Request a repair estimate | |
| DesignJet 755 06030B error | Bad ambient temperature | Request a repair estimate | |
| DesignJet 755 060308 error | Problem with pen voltage | Request a repair estimate | |
| DesignJet 755 060309 error | Problem with pen voltage | Request a repair estimate | |
| DesignJet 755 070000 error | Unable to calibrate drop detect | Request a repair estimate | |
| DesignJet 755 070005 error | Calibration prioblem | Request a repair estimate | |
| DesignJet 755 070006 error | Calibration prioblem | Request a repair estimate | |
| DesignJet 755 070007 error | Calibration prioblem | Request a repair estimate | |
| DesignJet 755 070008 error | Calibration prioblem | Request a repair estimate | |
| DesignJet 755 070010 error | False drops detected, check your power supply is not noisy | Request a repair estimate | |
| DesignJet 755 070020 error | Drop detect error | Request a repair estimate | |
| DesignJet 755 070030 error | Drop detect error | Request a repair estimate | |
| DesignJet 755 070100 error | Firmware error | Request a repair estimate | |
| DesignJet 755 0000D8 error | Firmware error | Request a repair estimate | |
| DesignJet 755 080001 error | Postscript error | Request a repair estimate | |
| DesignJet 800 error codes | |||
| DesignJet 800 01:10 error | Electronics module failure | Request a repair estimate | |
| DesignJet 800 01:11 error | Electronics module fan failure | Request a repair estimate | |
| DesignJet 800 01:12 error | EEROM not configured correctly | Request a repair estimate | |
| DesignJet 800 01:13 error | Electronics module failure | Request a repair estimate | |
| DesignJet 800 02:10 error | Carriage failure | Request a repair estimate | |
| DesignJet 800 02:13 error | carriage failure | Request a repair estimate | |
| DesignJet 800 03:10 error | Power supply failuer | Request a repair estimate | |
| DesignJet 800 04:11 error | LAN card not detected | Request a repair estimate | |
| DesignJet 800 05:09 error | Formatter or HP GL/2 card not detected | Request a repair estimate | |
| DesignJet 800 05:10 error | Formatter not detected | Request a repair estimate | |
| DesignJet 800 05:11 error | Formatter not detected | Request a repair estimate | |
| DesignJet 800 06:03 error | Formatter hard drive not functioning | Request a repair estimate | |
| DesignJet 800 08:11 error | Front panel not detected | Request a repair estimate | |
| DesignJet 800 11:11 error | Trailing cable defective | Request a repair estimate | |
| DesignJet 800 11:13 error | Printhead voltage: Possible trailing cable or carriage defective | Request a repair estimate | |
| DesignJet 800 12:11 error | Attempt to resolve by cleaning printheads or possible defective carriage | Request a repair estimate | |
| DesignJet 800 21:10 error | Service station failure | Request a repair estimate | |
| DesignJet 800 21:11 error | Attempt to resolve by firmware upgrade or possible defective s/stn | Request a repair estimate | |
| DesignJet 800 22:10 error | Ensure all inks are genuine HP or possible Ink supply station failure | Request a repair estimate | |
| DesignJet 800 41:10 error | Paper axis (X-Axis) motor failure | Request a repair estimate | |
| DesignJet 800 41:13 error | Paper axis motor encoder failure | Request a repair estimate | |
| DesignJet 800 42:10 error | Scan axis (Y-Axis) motor failure | Request a repair estimate | |
| DesignJet 800 43:10 error | Vacuum fan failure | Request a repair estimate | |
| DesignJet 800 43:11 error | Vacuum fan not detected | Request a repair estimate | |
| DesignJet 800 56:10 error | Drive roller encoder sensor failure | Request a repair estimate | |
| DesignJet 800 56:13 error | Drive roller encoder sensor failure | Request a repair estimate | |
| DesignJet 800 61:04 error | Firmware error, attempt to resolve by firmware upgrade | Request a repair estimate | |
| DesignJet 800 61:05 error | Communication problem, try new driver & different connection method | Request a repair estimate | |
| DesignJet 800 62:03 error | Parallel port communication error, call us to discuss | Request a repair estimate | |
| DesignJet 800 63:03 error | LAN card communication error, attempt firmware upgrade | Request a repair estimate | |
| DesignJet 800 64:03 error | USB port communication error, attempt firmware upgrade | Request a repair estimate | |
| DesignJet 800 64:04 error | USB port communication error, attempt firmware upgrade | Request a repair estimate | |
| DesignJet 800 65:03 error | Communication error, attempt firmware upgrade / driver upgrade | Request a repair estimate | |
| DesignJet 800 71:04 error | Formatter issue, attempt firmware upgrade | Request a repair estimate | |
| DesignJet 800 71:06 error | Out of memory, request quote for memory upgrade | Request a repair estimate | |
| DesignJet 800 72:04 error | Scan axis firmware error, attempt firmware upgrade | Request a repair estimate | |
| DesignJet 800 73:04 error | Servo error, Possible new electronics module | Request a repair estimate | |
| DesignJet 800 79:04 error | Firmware error, attempt firmware upgrade | Request a repair estimate | |
| DesignJet 800 81:01 error | Paper axis shutdown, possible defective encoder disk | Request a repair estimate | |
| DesignJet 800 81:11 error | Paper axis shutdown, possible defective encoder disk | Request a repair estimate | |
| DesignJet 800 85:10 error | Paper axis encoder error, possible defectice encoder/sensor | Request a repair estimate | |
| DesignJet 800 86:01 error | Carriage axis shutdown | Request a repair estimate | |
| DesignJet 800 86:11 error | Carriage axis shutdown | Request a repair estimate | |
| DesignJet 800 86:13 error | Carriage axis shutdown, attempt firmware upgrade | Request a repair estimate | |
| DesignJet 800 87:13 error | Possible defective carriage assembly | Request a repair estimate | |
| DesignJet 800 93:10 error | Ink system failure, check inks are ok & genuine HP, possible tubes assy | Request a repair estimate | |
| DesignJet 1050 & DesignJet 1055 error codes | |||
| DesignJet 1050 0B0000 error | Bad Ambient Temperture Measured | Request a repair estimate | |
| DesignJet 1050 0B0001 error | Bad Humidity Read | Request a repair estimate | |
| DesignJet 1050 0B0002 error | Bad IDS Pressure Read | Request a repair estimate | |
| DesignJet 1050 0B0003 error | ACDO Intrenal Channles Check Failure | Request a repair estimate | |
| DesignJet 1050 0B0004 error | Unable To Detect Pump | Request a repair estimate | |
| DesignJet 1050 0B0005 error | Unable To Detect Valve | Request a repair estimate | |
| DesignJet 1050 0B0006 error | Trailing Cable Incorrectly Connected OR Fuse In Electronics Module Has Burned | Request a repair estimate | |
| DesignJet 1050 0B0007 error | Unable To Detect Vacuum Fan | Request a repair estimate | |
| DesignJet 1050 0B0008 error | Unable To Detect Cooling Fan | Request a repair estimate | |
| DesignJet 1050 0B0009 error | Unable To Detect Aerosol Fan (Including On Right Cover) | Request a repair estimate | |
| DesignJet 1050 0B000A error | Primer Shut Down Error | Request a repair estimate | |
| DesignJet 1050 0B000B error | Pump Or Pressure Sensor Not Working | Request a repair estimate | |
| DesignJet 1050 0B000C error | Serial Device ADC Test Failure | Request a repair estimate | |
| DesignJet 1050 0B000D error | 24 V Source Test Faiulre | Request a repair estimate | |
| DesignJet 1050 0B000E error | Short Circuit In Scan-Axis Motor | Request a repair estimate | |
| DesignJet 1050 0000D8 error | External Library Error | Request a repair estimate | |
| DesignJet 1050 01002D error | The Main PCA Cannot Communicate With The Carriage | Request a repair estimate | |
| DesignJet 1050 010020 error | FirmWare DIMM Test Failure | Request a repair estimate | |
| DesignJet 1050 010021 error | Memory Module Test Failure | Request a repair estimate | |
| DesignJet 1050 010023 error | EEROM Test Failure | Request a repair estimate | |
| DesignJet 1050 010028 error | EEROM Checksum Failure | Request a repair estimate | |
| DesignJet 1050 010029 error | EEROM Write Failure | Request a repair estimate | |
| DesignJet 1050 010040 error | Error In Paper-Axis Encoder Quadrature | Request a repair estimate | |
| DesignJet 1050 010041 error | Error In Scan-Axis Encoder Quadrature | Request a repair estimate | |
| DesignJet 1050 010042 error | Error In Service Station-Axis Encoder Quadrature | Request a repair estimate | |
| DesignJet 1050 010050 error | PostScript Processing Error | Request a repair estimate | |
| DesignJet 1050 01009X error | Error In Paper-Axis Motor Encoder | Request a repair estimate | |
| DesignJet 1050 02xxxx error | PostScript/Firmware Error | Request a repair estimate | |
| DesignJet 1050 04Cxxx error | EIO Accessories (EIO Card/Hard Disk Drive) Error | Request a repair estimate | |
| DesignJet 1050 048xxx error | EIO Card Is From A Third Party Vendor May Not Be Fully Compliant With IIO Protocol Specification2.0 OR EIO Card Firmware Is Not Updated | Request a repair estimate | |
| DesignJet 1050 048500 error | There Are Too Many EIO Cards Connected To Printer | Request a repair estimate | |
| DesignJet 1050 060300 error | One Of The Printheads Has Internal Electrical Problem | Request a repair estimate | |
| DesignJet 1050 060301 error | One Of The Printheads Has Internal Electrical Problem | Request a repair estimate | |
| DesignJet 1050 060305 error | Thermal Shutdown Error(One Of The Printheads Has Gone Above Maximum Teperture) | Request a repair estimate | |
| DesignJet 1050 060306 error | Problem With Printhead Selection | Request a repair estimate | |
| DesignJet 1050 060307 error | APA Regulation Failure | Request a repair estimate | |
| DesignJet 1050 060308 error | APA Regulation Failure | Request a repair estimate | |
| DesignJet 1050 060309 error | Problem With Setting The Voltage Of Printheads | Request a repair estimate | |
| DesignJet 1050 06030A error | Error In Finding The Mark Encoder | Request a repair estimate | |
| DesignJet 1050 06030B error | Tje Ambient Temperture Measured Is Out Of The Normal Range | Request a repair estimate | |
| DesignJet 1050 070100 error | Firmware Error | Request a repair estimate | |
| DesignJet 1050 080001 error | PostScript Error | Request a repair estimate | |
| DesignJet 1050 09xxxx error | EIO Accessories (EIO Card/Hard Disk Drive) Error | Request a repair estimate | |
| DesignJet 1050 09Axxx error | Internal Error | Request a repair estimate | |
| DesignJet 1050 09A001 error | There Are Too Many Hard Disk Drives Connected To The Printer | Request a repair estimate | |
| DesignJet 1050 09Bxxx error | Internal Error | Request a repair estimate | |
| DesignJet 1050 09Cxxx error | Internal Error | Request a repair estimate | |
| DesignJet 1050 0A0000 error | The Air Pressure Is Below The Minimum Requirement | Request a repair estimate | |
| DesignJet 1050 0A0010 error | Problem In Pressurizing The Air System | Request a repair estimate | |
| DesignJet 1050 0A0020 error | Error In Cabrating The APS Sensor | Request a repair estimate | |
| DesignJet 1050 0A0030 error | Problem In Depressurizing Air System | Request a repair estimate | |
| DesignJet 1050 0A0040 error | Ink Tubes Initialization Failure Due To Low Air Pressure | Request a repair estimate | |
| DesignJet 1050 0A0050 error | The Printer Has Detected A Leak In The Tubes System Before The Life Of The System | Request a repair estimate | |
| DesignJet 1050 0A0060 error | The Printer Has Detected A Leak In The Tubes System After The Life Of The System | Request a repair estimate | |
| DesignJet 1050 0A0070 error | The Backup EEROM Contents Stored In The Tubes Systems Are Not Consistent With The Ones Required By The Firmware | Request a repair estimate | |
| DesignJet 1050 0C0030 error | Bad Drop Detector | Request a repair estimate | |
| DesignJet 1050 0C0032 error | Drop Detector Not Calibrated For All Printheads | Request a repair estimate | |
| DesignJet 1050 0C1000 error | Primer Not Calibrated | Request a repair estimate | |
| DesignJet 1050 0C1001 error | Primer Shutdown Error | Request a repair estimate | |
| DesignJet 1050 0D00 error | System Error Code Related To The Multi-roll Feeder | Request a repair estimate | |
| DesignJet 1055 0B0000 error | Bad Ambient Temperture Measured | Request a repair estimate | |
| DesignJet 1055 0B0001 error | Bad Humidity Read | Request a repair estimate | |
| DesignJet 1055 0B0002 error | Bad IDS Pressure Read | Request a repair estimate | |
| DesignJet 1055 0B0003 error | ACDO Intrenal Channles Check Failure | Request a repair estimate | |
| DesignJet 1055 0B0004 error | Unable To Detect Pump | Request a repair estimate | |
| DesignJet 1055 0B0005 error | Unable To Detect Valve | Request a repair estimate | |
| DesignJet 1055 0B0006 error | Trailing Cable Incorrectly Connected OR Fuse In Electronics Module Has Burned | Request a repair estimate | |
| DesignJet 1055 0B0007 error | Unable To Detect Vacuum Fan | Request a repair estimate | |
| DesignJet 1055 0B0008 error | Unable To Detect Cooling Fan | Request a repair estimate | |
| DesignJet 1055 0B0009 error | Unable To Detect Aerosol Fan (Including On Right Cover) | Request a repair estimate | |
| DesignJet 1055 0B000A error | Primer Shut Down Error | Request a repair estimate | |
| DesignJet 1055 0B000B error | Pump Or Pressure Sensor Not Working | Request a repair estimate | |
| DesignJet 1055 0B000C error | Serial Device ADC Test Failure | Request a repair estimate | |
| DesignJet 1055 0B000D error | 24 V Source Test Faiulre | Request a repair estimate | |
| DesignJet 1055 0B000E error | Short Circuit In Scan-Axis Motor | Request a repair estimate | |
| DesignJet 1055 0000D8 error | External Library Error | Request a repair estimate | |
| DesignJet 1055 01002D error | The Main PCA Cannot Communicate With The Carriage | Request a repair estimate | |
| DesignJet 1055 010020 error | FirmWare DIMM Test Failure | Request a repair estimate | |
| DesignJet 1055 010021 error | Memory Module Test Failure | Request a repair estimate | |
| DesignJet 1055 010023 error | EEROM Test Failure | Request a repair estimate | |
| DesignJet 1055 010028 error | EEROM Checksum Failure | Request a repair estimate | |
| DesignJet 1055 010029 error | EEROM Write Failure | Request a repair estimate | |
| DesignJet 1055 010040 error | Error In Paper-Axis Encoder Quadrature | Request a repair estimate | |
| DesignJet 1055 010041 error | Error In Scan-Axis Encoder Quadrature | Request a repair estimate | |
| DesignJet 1055 010042 error | Error In Service Station-Axis Encoder Quadrature | Request a repair estimate | |
| DesignJet 1055 010050 error | PostScript Processing Error | Request a repair estimate | |
| DesignJet 1055 01009X error | Error In Paper-Axis Motor Encoder | Request a repair estimate | |
| DesignJet 1055 02xxxx error | PostScript/Firmware Error | Request a repair estimate | |
| DesignJet 1055 04Cxxx error | EIO Accessories (EIO Card/Hard Disk Drive) Error | Request a repair estimate | |
| DesignJet 1055 048xxx error | EIO Card Is From A Third Party Vendor May Not Be Fully Compliant With IIO Protocol Specification2.0 OR EIO Card Firmware Is Not Updated | Request a repair estimate | |
| DesignJet 1055 048500 error | There Are Too Many EIO Cards Connected To Printer | Request a repair estimate | |
| DesignJet 1055 060300 error | One Of The Printheads Has Internal Electrical Problem | Request a repair estimate | |
| DesignJet 1055 060301 error | One Of The Printheads Has Internal Electrical Problem | Request a repair estimate | |
| DesignJet 1055 060305 error | Thermal Shutdown Error(One Of The Printheads Has Gone Above Maximum Teperture) | Request a repair estimate | |
| DesignJet 1055 060306 error | Problem With Printhead Selection | Request a repair estimate | |
| DesignJet 1055 060307 error | APA Regulation Failure | Request a repair estimate | |
| DesignJet 1055 060308 error | APA Regulation Failure | Request a repair estimate | |
| DesignJet 1055 060309 error | Problem With Setting The Voltage Of Printheads | Request a repair estimate | |
| DesignJet 1055 06030A error | Error In Finding The Mark Encoder | Request a repair estimate | |
| DesignJet 1055 06030B error | Tje Ambient Temperture Measured Is Out Of The Normal Range | Request a repair estimate | |
| DesignJet 1055 070100 error | Firmware Error | Request a repair estimate | |
| DesignJet 1055 080001 error | PostScript Error | Request a repair estimate | |
| DesignJet 1055 09xxxx error | EIO Accessories (EIO Card/Hard Disk Drive) Error | Request a repair estimate | |
| DesignJet 1055 09Axxx error | Internal Error | Request a repair estimate | |
| DesignJet 1055 09A001 error | There Are Too Many Hard Disk Drives Connected To The Printer | Request a repair estimate | |
| DesignJet 1055 09Bxxx error | Internal Error | Request a repair estimate | |
| DesignJet 1055 09Cxxx error | Internal Error | Request a repair estimate | |
| DesignJet 1055 0A0000 error | The Air Pressure Is Below The Minimum Requirement | Request a repair estimate | |
| DesignJet 1055 0A0010 error | Problem In Pressurizing The Air System | Request a repair estimate | |
| DesignJet 1055 0A0020 error | Error In Cabrating The APS Sensor | Request a repair estimate | |
| DesignJet 1055 0A0030 error | Problem In Depressurizing Air System | Request a repair estimate | |
| DesignJet 1055 0A0040 error | Ink Tubes Initialization Failure Due To Low Air Pressure | Request a repair estimate | |
| DesignJet 1055 0A0050 error | The Printer Has Detected A Leak In The Tubes System Before The Life Of The System | Request a repair estimate | |
| DesignJet 1055 0A0060 error | The Printer Has Detected A Leak In The Tubes System After The Life Of The System | Request a repair estimate | |
| DesignJet 1055 0A0070 error | The Backup EEROM Contents Stored In The Tubes Systems Are Not Consistent With The Ones Required By The Firmware | Request a repair estimate | |
| DesignJet 1055 0C0030 error | Bad Drop Detector | Request a repair estimate | |
| DesignJet 1055 0C0032 error | Drop Detector Not Calibrated For All Printheads | Request a repair estimate | |
| DesignJet 1055 0C1000 error | Primer Not Calibrated | Request a repair estimate | |
| DesignJet 1055 0C1001 error | Primer Shutdown Error | Request a repair estimate | |
| DesignJet 1055 0D00 error | System Error Code Related To The Multi-roll Feeder | Request a repair estimate | |
| DesignJet 2500CP, DesignJet 2800CP, DesignJet 3500CP, DesignJet 3800CP error codes | |||
| DesignJet 2000 010020 error | The CheckSum Read On The Flash SIMM Is InCorrect | Request a repair estimate | |
| DesignJet 2000 010021 error | The Base DRAM Or The RAM SIMM Tests Failed | Request a repair estimate | |
| DesignJet 2000 010022 error | The SWATH RAM Test Failed | Request a repair estimate | |
| DesignJet 2000 010023 error | A Fuse On The Main PCA Has Blown | Request a repair estimate | |
| DesignJet 2000 010025 error | Problem Initializing The Encoder Pulse Generator | Request a repair estimate | |
| DesignJet 2000 010030 error | One Of The Two Interconnect Boards Not Detected | Request a repair estimate | |
| DesignJet 2000 010031 error | The Printhead Primitive Driver ASIC Test Failed | Request a repair estimate | |
| DesignJet 2000 010032 error | Fan Test Failed - Current Not Detected In One Or Both Fans | Request a repair estimate | |
| DesignJet 2000 010033 error | The DC Motor ASIC Test Failed | Request a repair estimate | |
| DesignJet 2000 010034 error | One Of The DC Motor Has Failed | Request a repair estimate | |
| DesignJet 2000 010035 error | One Of The Stepper Motors Has Failed | Request a repair estimate | |
| DesignJet 2000 010036 error | ADC Test Failure In The Main PCA | Request a repair estimate | |
| DesignJet 2000 010037 error | ADC Test Failure In The Carriage PCA | Request a repair estimate | |
| DesignJet 2000 010038 error | A Printhead Voltage Could Not Be Set - Main PCA Failure | Request a repair estimate | |
| DesignJet 2000 010039 error | A Printhead Voltage Could Not Be Set - Carriage PCA Failure | Request a repair estimate | |
| DesignJet 2000 010040 error | The Amnient Temperture Measured Is Out Of The Normal Range | Request a repair estimate | |
| DesignJet 2000 010041 error | Problem In Setting The Printhead Voltage | Request a repair estimate | |
| DesignJet 2000 010042 error | The Status Of One Of The Optical Sensors Is Not Stable When It Should Be | Request a repair estimate | |
| DesignJet 2000 010100 error | Error Reading In The EEROM | Request a repair estimate | |
| DesignJet 2000 010101 error | An Action Outside The EEROM Limits Has Been Performed | Request a repair estimate | |
| DesignJet 2000 010102 error | Physical EEROM Write And/Or Write Operations Failed. The EEROM Data That Is Written Does Not Match The Data That Is Read | Request a repair estimate | |
| DesignJet 2000 010110 error | The Content Of The Permanent Configuration Area Of The EEROM Is Not Valid When The Printer Is initialised In Service Mode | Request a repair estimate | |
| DesignJet 2000 010111 error | The Content Of The User Configuration Area EEROM Is Not Valid When The Printer Is initialised | Request a repair estimate | |
| DesignJet 2000 010120 error | The Content Of The Permanent Configuration Area Of The EERom Is Not Valid When Printer Is initialised In Normal Mode | Request a repair estimate | |
| DesignJet 2000 010121 error | One Of The Banks Of The User Area Was Corrupted While Writing Or Reading In That Area | Request a repair estimate | |
| DesignJet 2000 020000 error | Error In Finding The Primer Home Position | Request a repair estimate | |
| DesignJet 2000 020001 error | Error In Finding The Elevator Home Position | Request a repair estimate | |
| DesignJet 2000 020002 error | Error In Finding The Refill Arm Home Position | Request a repair estimate | |
| DesignJet 2000 020003 error | Error In Finding The refill Stepper Motor Home Position | Request a repair estimate | |
| DesignJet 2000 020004 error | Error In Finding The Service Station Home Position | Request a repair estimate | |
| DesignJet 2000 020005 error | Elevator Has A Problem Reaching A Desired Position | Request a repair estimate | |
| DesignJet 2000 020006 error | The Refill Position In The Y-axis In Not Calibrated | Request a repair estimate | |
| DesignJet 2000 020010 error | Problem With Fine Movement of The Y-Axis Motor | Request a repair estimate | |
| DesignJet 2000 020011 error | Error During Initialization Of The Y-Axis | Request a repair estimate | |
| DesignJet 2000 040xxx error | MIO Card Error | Request a repair estimate | |
| DesignJet 2000 040601 error | The MIO Card Does Not Support The MIO 6 Protocol Cards With Vision 5 Or Below Can Not Be Used With The Plotter. Version 5.1 Cards Behave As Expected But Does Not Support PML Intructions | Request a repair estimate | |
| DesignJet 2000 050000 error | The Line Sensor Has Problems Finding The Mark Encoder | Request a repair estimate | |
| DesignJet 2000 060000 error | Th Line Sensor Is Not Functioning Properly Because There Is To Much Ambient Light | Request a repair estimate | |
| DesignJet 2000 060200 error | Incompatible Firmware And Carriage PCA | Request a repair estimate | |
| DesignJet 2000 060399 error | Incompatible Firmware And Line Sensor | Request a repair estimate | |
| DesignJet 2000 07xxxx error | Firmware Error | Request a repair estimate | |
| DesignJet 2000 08xxxx error | PostScript Error | Request a repair estimate | |
| DesignJet 2000 080001 error | Hard Disk Drive Installed Without PostScript | Request a repair estimate | |
| DesignJet 2000 09xxxx error | Problem With The Hard Disk | Request a repair estimate | |
| DesignJet 2000 09004 error | PostScript Installed Without The Hard Disk Drive | Request a repair estimate | |
| DesignJet 2500 010020 error | The CheckSum Read On The Flash SIMM Is InCorrect | Request a repair estimate | |
| DesignJet 2500 010021 error | The Base DRAM Or The RAM SIMM Tests Failed | Request a repair estimate | |
| DesignJet 2500 010022 error | The SWATH RAM Test Failed | Request a repair estimate | |
| DesignJet 2500 010023 error | A Fuse On The Main PCA Has Blown | Request a repair estimate | |
| DesignJet 2500 010025 error | Problem Initializing The Encoder Pulse Generator | Request a repair estimate | |
| DesignJet 2500 010030 error | One Of The Two Interconnect Boards Not Detected | Request a repair estimate | |
| DesignJet 2500 010031 error | The Printhead Primitive Driver ASIC Test Failed | Request a repair estimate | |
| DesignJet 2500 010032 error | Fan Test Failed - Current Not Detected In One Or Both Fans | Request a repair estimate | |
| DesignJet 2500 010033 error | The DC Motor ASIC Test Failed | Request a repair estimate | |
| DesignJet 2500 010034 error | One Of The DC Motor Has Failed | Request a repair estimate | |
| DesignJet 2500 010035 error | One Of The Stepper Motors Has Failed | Request a repair estimate | |
| DesignJet 2500 010036 error | ADC Test Failure In The Main PCA | Request a repair estimate | |
| DesignJet 2500 010037 error | ADC Test Failure In The Carriage PCA | Request a repair estimate | |
| DesignJet 2500 010038 error | A Printhead Voltage Could Not Be Set - Main PCA Failure | Request a repair estimate | |
| DesignJet 2500 010039 error | A Printhead Voltage Could Not Be Set - Carriage PCA Failure | Request a repair estimate | |
| DesignJet 2500 010040 error | The Amnient Temperture Measured Is Out Of The Normal Range | Request a repair estimate | |
| DesignJet 2500 010041 error | Problem In Setting The Printhead Voltage | Request a repair estimate | |
| DesignJet 2500 010042 error | The Status Of One Of The Optical Sensors Is Not Stable When It Should Be | Request a repair estimate | |
| DesignJet 2500 010100 error | Error Reading In The EEROM | Request a repair estimate | |
| DesignJet 2500 010101 error | An Action Outside The EEROM Limits Has Been Performed | Request a repair estimate | |
| DesignJet 2500 010102 error | Physical EEROM Write And/Or Write Operations Failed. The EEROM Data That Is Written Does Not Match The Data That Is Read | Request a repair estimate | |
| DesignJet 2500 010110 error | The Content Of The Permanent Configuration Area Of The EEROM Is Not Valid When The Printer Is Initialised In Service Mode | Request a repair estimate | |
| DesignJet 2500 010111 error | The Content Of The User Configuration Area EEROM Is Not Valid When The Printer Is initialised | Request a repair estimate | |
| DesignJet 2500 010120 error | The Content Of The Permanent Configuration Area Of The EERom Is Not Valid When Printer Is initialised In Normal Mode | Request a repair estimate | |
| DesignJet 2500 010121 error | One Of The Banks Of The User Area Was Corrupted While Writing Or Reading In That Area | Request a repair estimate | |
| DesignJet 2500 025000 error | Error In Finding The Primer Home Position | Request a repair estimate | |
| DesignJet 2500 025001 error | Error In Finding The Elevator Home Position | Request a repair estimate | |
| DesignJet 2500 025002 error | Error In Finding The Refill Arm Home Position | Request a repair estimate | |
| DesignJet 2500 025003 error | Error In Finding The refill Stepper Motor Home Position | Request a repair estimate | |
| DesignJet 2500 025004 error | Error In Finding The Service Station Home Position | Request a repair estimate | |
| DesignJet 2500 025005 error | Elevator Has A Problem Reaching A Desired Position | Request a repair estimate | |
| DesignJet 2500 025006 error | The Refill Position In The Y-axis In Not Calibrated | Request a repair estimate | |
| DesignJet 2500 020010 error | Problem With Fine Movement of The Y-Axis Motor | Request a repair estimate | |
| DesignJet 2500 020011 error | Error During Initialization Of The Y-Axis | Request a repair estimate | |
| DesignJet 2500 040xxx error | MIO Card Error | Request a repair estimate | |
| DesignJet 2500 040601 error | The MIO Card Does Not Support The MIO 6 Protocol Cards With Vision 5 Or Below Can Not Be Used With The Plotter. Version 5.1 Cards Behave As Expected But Does Not Support PML Intructions | Request a repair estimate | |
| DesignJet 2500 050000 error | The Line Sensor Has Problems Finding The Mark Encoder | Request a repair estimate | |
| DesignJet 2500 060000 error | Th Line Sensor Is Not Functioning Properly Because There Is To Much Ambient Light | Request a repair estimate | |
| DesignJet 2500 060200 error | Incompatible Firmware And Carriage PCA | Request a repair estimate | |
| DesignJet 2500 060399 error | Incompatible Firmware And Line Sensor | Request a repair estimate | |
| DesignJet 2500 07xxxx error | Firmware Error | Request a repair estimate | |
| DesignJet 2500 08xxxx error | PostScript Error | Request a repair estimate | |
| DesignJet 2500 080001 error | Hard Disk Drive Installed Without PostScript | Request a repair estimate | |
| DesignJet 2500 09xxxx error | Problem With The Hard Disk | Request a repair estimate | |
| DesignJet 2500 09004 error | PostScript Installed Without The Hard Disk Drive | Request a repair estimate | |
| DesignJet 3000 010020 error | The CheckSum Read On The Flash SIMM Is InCorrect | Request a repair estimate | |
| DesignJet 3000 010021 error | The Base DRAM Or The RAM SIMM Tests Failed | Request a repair estimate | |
| DesignJet 3000 010022 error | The SWATH RAM Test Failed | Request a repair estimate | |
| DesignJet 3000 010023 error | A Fuse On The Main PCA Has Blown | Request a repair estimate | |
| DesignJet 3000 010025 error | Problem Initializing The Encoder Pulse Generator | Request a repair estimate | |
| DesignJet 3000 010030 error | One Of The Two Interconnect Boards Not Detected | Request a repair estimate | |
| DesignJet 3000 010031 error | The Printhead Primitive Driver ASIC Test Failed | Request a repair estimate | |
| DesignJet 3000 010032 error | Fan Test Failed - Current Not Detected In One Or Both Fans | Request a repair estimate | |
| DesignJet 3000 010033 error | The DC Motor ASIC Test Failed | Request a repair estimate | |
| DesignJet 3000 010034 error | One Of The DC Motor Has Failed | Request a repair estimate | |
| DesignJet 3000 010035 error | One Of The Stepper Motors Has Failed | Request a repair estimate | |
| DesignJet 3000 010036 error | ADC Test Failure In The Main PCA | Request a repair estimate | |
| DesignJet 3000 010037 error | ADC Test Failure In The Carriage PCA | Request a repair estimate | |
| DesignJet 3000 010038 error | A Printhead Voltage Could Not Be Set - Main PCA Failure | Request a repair estimate | |
| DesignJet 3000 010039 error | A Printhead Voltage Could Not Be Set - Carriage PCA Failure | Request a repair estimate | |
| DesignJet 3000 010040 error | The Amnient Temperture Measured Is Out Of The Normal Range | Request a repair estimate | |
| DesignJet 3000 010041 error | Problem In Setting The Printhead Voltage | Request a repair estimate | |
| DesignJet 3000 010042 error | The Status Of One Of The Optical Sensors Is Not Stable When It Should Be | Request a repair estimate | |
| DesignJet 3000 010100 error | Error Reading In The EEROM | Request a repair estimate | |
| DesignJet 3000 010101 error | An Action Outside The EEROM Limits Has Been Performed | Request a repair estimate | |
| DesignJet 3000 010102 error | Physical EEROM Write And/Or Write Operations Failed. The EEROM Data That Is Written Does Not Match The Data That Is Read | Request a repair estimate | |
| DesignJet 3000 010110 error | The Content Of The Permanent Configuration Area Of The EEROM Is Not Valid When The Printer Is initialised In Service Mode | Request a repair estimate | |
| DesignJet 3000 010111 error | The Content Of The User Configuration Area EEROM Is Not Valid When The Printer Is initialised | Request a repair estimate | |
| DesignJet 3000 010120 error | The Content Of The Permanent Configuration Area Of The EERom Is Not Valid When Printer Is initialised In Normal Mode | Request a repair estimate | |
| DesignJet 3000 010121 error | One Of The Banks Of The User Area Was Corrupted While Writing Or Reading In That Area | Request a repair estimate | |
| DesignJet 3000 030000 error | Error In Finding The Primer Home Position | Request a repair estimate | |
| DesignJet 3000 030001 error | Error In Finding The Elevator Home Position | Request a repair estimate | |
| DesignJet 3000 030002 error | Error In Finding The Refill Arm Home Position | Request a repair estimate | |
| DesignJet 3000 030003 error | Error In Finding The refill Stepper Motor Home Position | Request a repair estimate | |
| DesignJet 3000 030004 error | Error In Finding The Service Station Home Position | Request a repair estimate | |
| DesignJet 3000 030005 error | Elevator Has A Problem Reaching A Desired Position | Request a repair estimate | |
| DesignJet 3000 030006 error | The Refill Position In The Y-axis In Not Calibrated | Request a repair estimate | |
| DesignJet 3000 020010 error | Problem With Fine Movement of The Y-Axis Motor | Request a repair estimate | |
| DesignJet 3000 020011 error | Error During Initialization Of The Y-Axis | Request a repair estimate | |
| DesignJet 3000 040xxx error | MIO Card Error | Request a repair estimate | |
| DesignJet 3000 040601 error | The MIO Card Does Not Support The MIO 6 Protocol Cards With Vision 5 Or Below Can Not Be Used With The Plotter. Version 5.1 Cards Behave As Expected But Does Not Support PML Intructions | Request a repair estimate | |
| DesignJet 3000 050000 error | The Line Sensor Has Problems Finding The Mark Encoder | Request a repair estimate | |
| DesignJet 3000 060000 error | Th Line Sensor Is Not Functioning Properly Because There Is To Much Ambient Light | Request a repair estimate | |
| DesignJet 3000 060200 error | Incompatible Firmware And Carriage PCA | Request a repair estimate | |
| DesignJet 3000 060399 error | Incompatible Firmware And Line Sensor | Request a repair estimate | |
| DesignJet 3000 07xxxx error | Firmware Error | Request a repair estimate | |
| DesignJet 3000 08xxxx error | PostScript Error | Request a repair estimate | |
| DesignJet 3000 080001 error | Hard Disk Drive Installed Without PostScript | Request a repair estimate | |
| DesignJet 3000 09xxxx error | Problem With The Hard Disk | Request a repair estimate | |
| DesignJet 3000 09004 error | PostScript Installed Without The Hard Disk Drive | Request a repair estimate | |
| DesignJet 3500 010020 error | The CheckSum Read On The Flash SIMM Is InCorrect | Request a repair estimate | |
| DesignJet 3500 010021 error | The Base DRAM Or The RAM SIMM Tests Failed | Request a repair estimate | |
| DesignJet 3500 010022 error | The SWATH RAM Test Failed | Request a repair estimate | |
| DesignJet 3500 010023 error | A Fuse On The Main PCA Has Blown | Request a repair estimate | |
| DesignJet 3500 010025 error | Problem Initializing The Encoder Pulse Generator | Request a repair estimate | |
| DesignJet 3500 010030 error | One Of The Two Interconnect Boards Not Detected | Request a repair estimate | |
| DesignJet 3500 010031 error | The Printhead Primitive Driver ASIC Test Failed | Request a repair estimate | |
| DesignJet 3500 010032 error | Fan Test Failed - Current Not Detected In One Or Both Fans | Request a repair estimate | |
| DesignJet 3500 010033 error | The DC Motor ASIC Test Failed | Request a repair estimate | |
| DesignJet 3500 010034 error | One Of The DC Motor Has Failed | Request a repair estimate | |
| DesignJet 3500 010035 error | One Of The Stepper Motors Has Failed | Request a repair estimate | |
| DesignJet 3500 010036 error | ADC Test Failure In The Main PCA | Request a repair estimate | |
| DesignJet 3500 010037 error | ADC Test Failure In The Carriage PCA | Request a repair estimate | |
| DesignJet 3500 010038 error | A Printhead Voltage Could Not Be Set - Main PCA Failure | Request a repair estimate | |
| DesignJet 3500 010039 error | A Printhead Voltage Could Not Be Set - Carriage PCA Failure | Request a repair estimate | |
| DesignJet 3500 010040 error | The Amnient Temperture Measured Is Out Of The Normal Range | Request a repair estimate | |
| DesignJet 3500 010041 error | Problem In Setting The Printhead Voltage | Request a repair estimate | |
| DesignJet 3500 010042 error | The Status Of One Of The Optical Sensors Is Not Stable When It Should Be | Request a repair estimate | |
| DesignJet 3500 010100 error | Error Reading In The EEROM | Request a repair estimate | |
| DesignJet 3500 010101 error | An Action Outside The EEROM Limits Has Been Performed | Request a repair estimate | |
| DesignJet 3500 010102 error | Physical EEROM Write And/Or Write Operations Failed. The EEROM Data That Is Written Does Not Match The Data That Is Read | Request a repair estimate | |
| DesignJet 3500 010110 error | The Content Of The Permanent Configuration Area Of The EEROM Is Not Valid When The Printer Is initialised In Service Mode | Request a repair estimate | |
| DesignJet 3500 010111 error | The Content Of The User Configuration Area EEROM Is Not Valid When The Printer Is initialised | Request a repair estimate | |
| DesignJet 3500 010120 error | The Content Of The Permanent Configuration Area Of The EERom Is Not Valid When Printer Is initialised In Normal Mode | Request a repair estimate | |
| DesignJet 3500 010121 error | One Of The Banks Of The User Area Was Corrupted While Writing Or Reading In That Area | Request a repair estimate | |
| DesignJet 3500 035000 error | Error In Finding The Primer Home Position | Request a repair estimate | |
| DesignJet 3500 035001 error | Error In Finding The Elevator Home Position | Request a repair estimate | |
| DesignJet 3500 035002 error | Error In Finding The Refill Arm Home Position | Request a repair estimate | |
| DesignJet 3500 035003 error | Error In Finding The refill Stepper Motor Home Position | Request a repair estimate | |
| DesignJet 3500 035004 error | Error In Finding The Service Station Home Position | Request a repair estimate | |
| DesignJet 3500 035005 error | Elevator Has A Problem Reaching A Desired Position | Request a repair estimate | |
| DesignJet 3500 035006 error | The Refill Position In The Y-axis In Not Calibrated | Request a repair estimate | |
| DesignJet 3500 020010 error | Problem With Fine Movement of The Y-Axis Motor | Request a repair estimate | |
| DesignJet 3500 020011 error | Error During Initialization Of The Y-Axis | Request a repair estimate | |
| DesignJet 3500 040xxx error | MIO Card Error | Request a repair estimate | |
| DesignJet 3500 040601 error | The MIO Card Does Not Support The MIO 6 Protocol Cards With Vision 5 Or Below Can Not Be Used With The Plotter. Version 5.1 Cards Behave As Expected But Does Not Support PML Intructions | Request a repair estimate | |
| DesignJet 3500 050000 error | The Line Sensor Has Problems Finding The Mark Encoder | Request a repair estimate | |
| DesignJet 3500 060000 error | Th Line Sensor Is Not Functioning Properly Because There Is To Much Ambient Light | Request a repair estimate | |
| DesignJet 3500 060200 error | Incompatible Firmware And Carriage PCA | Request a repair estimate | |
| DesignJet 3500 060399 error | Incompatible Firmware And Line Sensor | Request a repair estimate | |
| DesignJet 3500 07xxxx error | Firmware Error | Request a repair estimate | |
| DesignJet 3500 08xxxx error | PostScript Error | Request a repair estimate | |
| DesignJet 3500 080001 error | Hard Disk Drive Installed Without PostScript | Request a repair estimate | |
| DesignJet 3500 09xxxx error | Problem With The Hard Disk | Request a repair estimate | |
| DesignJet 3500 09004 error | PostScript Installed Without The Hard Disk Drive | Request a repair estimate | |
| DesignJet 4000 error codes | |||
| DesignJet 4000 01.0:03 error | Error Impact 12C Channel | Request a repair estimate | |
| DesignJet 4000 01.0:10 error | Problem With The Gamut PCI PCA | Request a repair estimate | |
| DesignJet 4000 01.1:10 error | Problem Wuth The PrintMech PCA | Request a repair estimate | |
| DesignJet 4000 01.2:10 error | ISS PCA Faulty - Humidity Sensor Out Of Scale Or NVM Backup Failure | Request a repair estimate | |
| DesignJet 4000 02:10 error | Encoder Seems To Be Wrong | Request a repair estimate | |
| DesignJet 4000 02.1:10 error | Problem With The Carriage PCA | Request a repair estimate | |
| DesignJet 4000 03:10 error | Problem With The Power Supply Unit | Request a repair estimate | |
| DesignJet 4000 05.1:10 error | CPU Fan Is Stoppede Or Burnt | Request a repair estimate | |
| DesignJet 4000 05.3:10 error | Main Memory Size Failure | Request a repair estimate | |
| DesignJet 4000 06:03 error | NVM File Has Bad CRC | Request a repair estimate | |
| DesignJet 4000 06:10 error | Main NVM Failure - Not Detected, Read/Write Failed Or Readback Error | Request a repair estimate | |
| DesignJet 4000 07:10 error | Aerosol Fan Drive Burnt | Request a repair estimate | |
| DesignJet 4000 08:10 error | Problem With Front Panel | Request a repair estimate | |
| DesignJet 4000 11:10 error | Trailing Cable Does Not Seem To Be Detected | Request a repair estimate | |
| DesignJet 4000 13.n:10 error | Problem Starting Acumen Supplies | Request a repair estimate | |
| DesignJet 4000 21:03 error | Service Station Servo Shutdown | Request a repair estimate | |
| DesignJet 4000 21:12 error | Fail Moving Service Station | Request a repair estimate | |
| DesignJet 4000 21:13 error | Problem With The Service Station | Request a repair estimate | |
| DesignJet 4000 23:10 error | Problem With The APS | Request a repair estimate | |
| DesignJet 4000 24:03 error | Ink Setup faiure(Ink Supply Tubes Purge Failed) | Request a repair estimate | |
| DesignJet 4000 24:10 error | Broken Bag Detected in Ink Cartridge | Request a repair estimate | |
| DesignJet 4000 26.0:01 error | Bad Contact Detected In ISS Slot 0 Floater | Request a repair estimate | |
| DesignJet 4000 26.1:01 error | Bad Contact Detected In ISS Slot 1 Floater | Request a repair estimate | |
| DesignJet 4000 26.2:01 error | Bad Contact Detected In ISS Slot 2 Floater | Request a repair estimate | |
| DesignJet 4000 26.3:01 error | Bad Contact Detected In ISS Slot 3 Floater | Request a repair estimate | |
| DesignJet 4000 26.n:10 error | Order Of Ink Supplies Incorrect | Request a repair estimate | |
| DesignJet 4000 26:14 error | A Wrong Ink Cartridge Has Been Detected | Request a repair estimate | |
| DesignJet 4000 27:03 error | An Error Has Occurred In Printhead Detection | Request a repair estimate | |
| DesignJet 4000 27:14 error | A Wrong Printhead Has Been Detected | Request a repair estimate | |
| DesignJet 4000 29.0:01 error | Printhead Cleaner Not Inserted Correctly In Slot 1 | Request a repair estimate | |
| DesignJet 4000 29.1:01 error | Printhead Cleaner Not Inserted Correctly In Slot 2 | Request a repair estimate | |
| DesignJet 4000 29.2:01 error | Printhead Cleaner Not Inserted Correctly In Slot 3 | Request a repair estimate | |
| DesignJet 4000 29.3:01 error | Printhead Cleaner Not Inserted Correctly In Slot 4 | Request a repair estimate | |
| DesignJet 4000 29.4:01 error | Printhead Cleaner Not Inserted Correctly In Slot 5 | Request a repair estimate | |
| DesignJet 4000 29.5:01 error | Printhead Cleaner Not Inserted Correctly In Slot 6 | Request a repair estimate | |
| DesignJet 4000 29.6:01 error | Printhead Cleaner Not Inserted Correctly In Slot 7 | Request a repair estimate | |
| DesignJet 4000 29.7:01 error | Printhead Cleaner Not Inserted Correctly In Slot 8 | Request a repair estimate | |
| DesignJet 4000 41:03 error | Electrical Current Limit In Media-Axis Motor | Request a repair estimate | |
| DesignJet 4000 41:10 error | Electrical Fault In Media-Axis Motor | Request a repair estimate | |
| DesignJet 4000 42:03 error | Elecrtical Current Limit In Scan-Axis Motor | Request a repair estimate | |
| DesignJet 4000 42:10 error | Electrical Fault In Scan-Axis Motor | Request a repair estimate | |
| DesignJet 4000 43:10 error | Vacuum Fan Has Stoped Functioning | Request a repair estimate | |
| DesignJet 4000 44:10 error | Problem With The Aerosol Fan | Request a repair estimate | |
| DesignJet 4000 44:11 error | Aerosol Fan Not Connected | Request a repair estimate | |
| DesignJet 4000 51:10 error | Window Sensor Failure | Request a repair estimate | |
| DesignJet 4000 51.1:10 error | PHC Access Door Sensor Failure | Request a repair estimate | |
| DesignJet 4000 52:10 error | Drop Detector Switch On/Off Failure | Request a repair estimate | |
| DesignJet 4000 53:10 error | Media Sensor Failure | Request a repair estimate | |
| DesignJet 4000 54:10 error | Media Lever Sensor failure | Request a repair estimate | |
| DesignJet 4000 55:10 error | Problem With The Line Sensor | Request a repair estimate | |
| DesignJet 4000 56:03 error | Analog Encoder Calibration Failed | Request a repair estimate | |
| DesignJet 4000 56:10 error | Analog Encoder Calibration Failed | Request a repair estimate | |
| DesignJet 4000 61:01 error | The File Format Is Incorrect And The Printer Cannot Process The Job | Request a repair estimate | |
| DesignJet 4000 61:04.1 error | The Postscript Fonts Are Missing. Upgrade The Firmware | Request a repair estimate | |
| DesignJet 4000 61:08.1 error |
The File Cannot Be Printed Because It Is Password Protected | Request a repair estimate | |
| DesignJet 4000 63:04 error | Input/Output Problem Through The Network Card | Request a repair estimate | |
| DesignJet 4000 64:04 error | Input/Output Problem Through The USB Port |
Request a repair estimate | |
| DesignJet 4000 65:04 error | Input/Output Problem Through An Unknown Port | Request a repair estimate | |
| DesignJet 4000 66:08 error | Cannot Print File On Current Paper Type. The Paper Type Has Changed Since The File Was Sent | Request a repair estimate | |
| DesignJet 4000 67:04 error | Input/Output Problem Through a Fireware Port | Request a repair estimate | |
| DesignJet 4000 68:03 error | Non-critical permanent data was lost. This does not prevent the printer working, only that internal life counters will not be recorded untill the printer is restarted | Request a repair estimate | |
| DesignJet 4000 71:03 error | Out of memory failure | Request a repair estimate | |
| DesignJet 4000 71:04 error | Out of memory failure | Request a repair estimate | |
| DesignJet 4000 71:19 error | Defult serial Number found in the main and back uo NVM. It seems that both the Ink Supply and Hard Disk Drive have been replaced together | Request a repair estimate | |
| DesignJet 4000 72:04 error | Generic Firmware error | Request a repair estimate | |
| DesignJet 4000 73:03 error | Servo error | Request a repair estimate | |
| DesignJet 4000 74:00 error | Failed getting part number/serial number |
Request a repair estimate | |
| DesignJet 4000 74:01 error | Error uploading firmware | Request a repair estimate | |
| DesignJet 4000 74:04 error | Old vacuum fan detected - upgrade the firmware | Request a repair estimate | |
| DesignJet 4000 76:03 error | Out of disk space - data was lost | Request a repair estimate | |
| DesignJet 4000 77:04 error | Embedded web server internal software error | Request a repair estimate | |
| DesignJet 4000 79:03 error | Generic firmware error | Request a repair estimate | |
| DesignJet 4000 79:04 error | Generic firmware error | Request a repair estimate | |
| DesignJet 4000 79.1:04 error | CDS server lost connection with client | Request a repair estimate | |
| DesignJet 4000 81:01 error | Paper servo shutdown | Request a repair estimate | |
| DesignJet 4000 81:03 error | It was impossible to correctly stop the servo before setting the encoder position | Request a repair estimate | |
| DesignJet 4000 81:10 error | Fail starting paper motor | Request a repair estimate | |
| DesignJet 4000 85:03 error | Problem finding the drive roller zero | Request a repair estimate | |
| DesignJet 4000 86:01 error | Carriage servo shutdown | Request a repair estimate | |
| DesignJet 4000 86:03 error | Scan-axis lenght test failure | Request a repair estimate | |
| DesignJet 4000 86:10 error | Initialising scan-axis motor failure | Request a repair estimate | |
| DesignJet 4000 86:11 error | Scan-axis length too short | Request a repair estimate | |
| DesignJet 4000 91:10 error | Repeated printhead issue | Request a repair estimate | |
| DesignJet 4000 93:11 error | Unable to pressurise the IDS | Request a repair estimate | |
| DesignJet 4000 98:02 error | Switching to lower performance due to printhead quality | Request a repair estimate | |
| DesignJet 4500 error codes | |||
| DesignJet 4500 01.0:03 error | Error Impact 12C Channel | Request a repair estimate | |
| DesignJet 4500 01.0:10 error | Problem With The Gamut PCI PCA | Request a repair estimate | |
| DesignJet 4500 01.1:10 error | Problem Wuth The PrintMech PCA | Request a repair estimate | |
| DesignJet 4500 01.2:10 error | ISS PCA Faulty - Humidity Sensor Out Of Scale Or NVM Backup Failure | Request a repair estimate | |
| DesignJet 4500 02:10 error | Encoder Seems To Be Wrong | Request a repair estimate | |
| DesignJet 4500 02.1:10 error | Problem With The Carriage PCA | Request a repair estimate | |
| DesignJet 4500 03:10 error | Problem With The Power Supply Unit | Request a repair estimate | |
| DesignJet 4500 05.1:10 error | CPU Fan Is Stoppede Or Burnt | Request a repair estimate | |
| DesignJet 4500 05.3:10 error | Main Memory Size Failure | Request a repair estimate | |
| DesignJet 4500 06:03 error | NVM File Has Bad CRC | Request a repair estimate | |
| DesignJet 4500 06:10 error | Main NVM Failure - Not Detected, Read/Write Failed Or Readback Error | Request a repair estimate | |
| DesignJet 4500 07:10 error | Aerosol Fan Drive Burnt | Request a repair estimate | |
| DesignJet 4500 08:10 error | Problem With Front Panel | Request a repair estimate | |
| DesignJet 4500 11:10 error | Trailing Cable Does Not Seem To Be Detected | Request a repair estimate | |
| DesignJet 4500 13.n:10 error | Problem Starting Acumen Supplies | Request a repair estimate | |
| DesignJet 4500 21:03 error | Service Station Servo Shutdown | Request a repair estimate | |
| DesignJet 4500 21:12 error | Fail Moving Service Station | Request a repair estimate | |
| DesignJet 4500 21:13 error | Problem With The Service Station | Request a repair estimate | |
| DesignJet 4500 23:10 error | Problem With The APS | Request a repair estimate | |
| DesignJet 4500 24:03 error | Ink Setup faiure(Ink Supply Tubes Purge Failed) | Request a repair estimate | |
| DesignJet 4500 24:10 error | Broken Bag Detected in Ink Cartridge | Request a repair estimate | |
| DesignJet 4500 26.0:01 error | Bad Contact Detected In ISS Slot 0 Floater | Request a repair estimate | |
| DesignJet 4500 26.1:01 error | Bad Contact Detected In ISS Slot 1 Floater | Request a repair estimate | |
| DesignJet 4500 26.2:01 error | Bad Contact Detected In ISS Slot 2 Floater | Request a repair estimate | |
| DesignJet 4500 26.3:01 error | Bad Contact Detected In ISS Slot 3 Floater | Request a repair estimate | |
| DesignJet 4500 26.n:10 error | Order Of Ink Supplies Incorrect | Request a repair estimate | |
| DesignJet 4500 26:14 error | A Wrong Ink Cartridge Has Been Detected | Request a repair estimate | |
| DesignJet 4500 27:03 error | An Error Has Occurred In Printhead Detection | Request a repair estimate | |
| DesignJet 4500 27:14 error | A Wrong Printhead Has Been Detected | Request a repair estimate | |
| DesignJet 4500 29.0:01 error | Printhead Cleaner Not Inserted Correctly In Slot 1 | Request a repair estimate | |
| DesignJet 4500 29.1:01 error | Printhead Cleaner Not Inserted Correctly In Slot 2 | Request a repair estimate | |
| DesignJet 4500 29.2:01 error | Printhead Cleaner Not Inserted Correctly In Slot 3 | Request a repair estimate | |
| DesignJet 4500 29.3:01 error | Printhead Cleaner Not Inserted Correctly In Slot 4 | Request a repair estimate | |
| DesignJet 4500 29.4:01 error | Printhead Cleaner Not Inserted Correctly In Slot 5 | Request a repair estimate | |
| DesignJet 4500 29.5:01 error | Printhead Cleaner Not Inserted Correctly In Slot 6 | Request a repair estimate | |
| DesignJet 4500 29.6:01 error | Printhead Cleaner Not Inserted Correctly In Slot 7 | Request a repair estimate | |
| DesignJet 4500 29.7:01 error | Printhead Cleaner Not Inserted Correctly In Slot 8 | Request a repair estimate | |
| DesignJet 4500 41:03 error | Electrical Current Limit In Media-Axis Motor | Request a repair estimate | |
| DesignJet 4500 41:10 error | Electrical Fault In Media-Axis Motor | Request a repair estimate | |
| DesignJet 4500 42:03 error | Elecrtical Current Limit In Scan-Axis Motor | Request a repair estimate | |
| DesignJet 4500 42:10 error | Electrical Fault In Scan-Axis Motor | Request a repair estimate | |
| DesignJet 4500 43:10 error | Vacuum Fan Has Stoped Functioning | Request a repair estimate | |
| DesignJet 4500 44:10 error | Problem With The Aerosol Fan | Request a repair estimate | |
| DesignJet 4500 44:11 error | Aerosol Fan Not Connected | Request a repair estimate | |
| DesignJet 4500 51:10 error | Window Sensor Failure | Request a repair estimate | |
| DesignJet 4500 51.1:10 error | PHC Access Door Sensor Failure | Request a repair estimate | |
| DesignJet 4500 52:10 error | Drop Detector Switch On/Off Failure | Request a repair estimate | |
| DesignJet 4500 53:10 error | Media Sensor Failure | Request a repair estimate | |
| DesignJet 4500 54:10 error | Media Lever Sensor failure | Request a repair estimate | |
| DesignJet 4500 55:10 error | Problem With The Line Sensor | Request a repair estimate | |
| DesignJet 4500 56:03 error | Analog Encoder Calibration Failed | Request a repair estimate | |
| DesignJet 4500 56:10 error | Analog Encoder Calibration Failed | Request a repair estimate | |
| DesignJet 4500 61:01 error | The File Format Is Incorrect And The Printer Cannot Process The Job | Request a repair estimate | |
| DesignJet 4500 61:04.1 error | The Postscript Fonts Are Missing. Upgrade The Firmware | Request a repair estimate | |
| DesignJet 4500 61:08.1 error |
The File Cannot Be Printed Because It Is Password Protected | Request a repair estimate | |
| DesignJet 4500 63:04 error | Input/Output Problem Through The Network Card | Request a repair estimate | |
| DesignJet 4500 64:04 error | Input/Output Problem Through The USB Port |
Request a repair estimate | |
| DesignJet 4500 65:04 error | Input/Output Problem Through An Unknown Port | Request a repair estimate | |
| DesignJet 4500 66:08 error | Cannot Print File On Current Paper Type. The Paper Type Has Changed Since The File Was Sent | Request a repair estimate | |
| DesignJet 4500 67:04 error | Input/Output Problem Through a Fireware Port | Request a repair estimate | |
| DesignJet 4500 68:03 error | Non-critical permanent data was lost. This does not prevent the printer working, only that internal life counters will not be recorded untill the printer is restarted | Request a repair estimate | |
| DesignJet 4500 71:03 error | Out of memory failure | Request a repair estimate | |
| DesignJet 4500 71:04 error | Out of memory failure | Request a repair estimate | |
| DesignJet 4500 71:19 error | Defult serial Number found in the main and back uo NVM. It seems that both the Ink Supply and Hard Disk Drive have been replaced together | Request a repair estimate | |
| DesignJet 4500 72:04 error | Generic Firmware error | Request a repair estimate | |
| DesignJet 4500 73:03 error | Servo error | Request a repair estimate | |
| DesignJet 4500 74:00 error | Failed getting part number/serial number |
Request a repair estimate | |
| DesignJet 4500 74:01 error | Error uploading firmware | Request a repair estimate | |
| DesignJet 4500 74:04 error | Old vacuum fan detected - upgrade the firmware | Request a repair estimate | |
| DesignJet 4500 76:03 error | Out of disk space - data was lost | Request a repair estimate | |
| DesignJet 4500 77:04 error | Embedded web server internal software error | Request a repair estimate | |
| DesignJet 4500 79:03 error | Generic firmware error | Request a repair estimate | |
| DesignJet 4500 79:04 error | Generic firmware error | Request a repair estimate | |
| DesignJet 4500 79.1:04 error | CDS server lost connection with client | Request a repair estimate | |
| DesignJet 4500 81:01 error | Paper servo shutdown | Request a repair estimate | |
| DesignJet 4500 81:03 error | It was impossible to correctly stop the servo before setting the encoder position | Request a repair estimate | |
| DesignJet 4500 81:10 error | Fail starting paper motor | Request a repair estimate | |
| DesignJet 4500 85:03 error | Problem finding the drive roller zero | Request a repair estimate | |
| DesignJet 4500 86:01 error | Carriage servo shutdown | Request a repair estimate | |
| DesignJet 4500 86:03 error | Scan-axis lenght test failure | Request a repair estimate | |
| DesignJet 4500 86:10 error | Initialising scan-axis motor failure | Request a repair estimate | |
| DesignJet 4500 86:11 error | Scan-axis length too short | Request a repair estimate | |
| DesignJet 4500 91:10 error | Repeated printhead issue | Request a repair estimate | |
| DesignJet 4500 93:11 error | Unable to pressurise the IDS | Request a repair estimate | |
| DesignJet 4500 98:02 error | Switching to lower performance due to printhead quality | Request a repair estimate | |
| DesignJet 5000 & DesignJet 5500 error codes | |||
|
|||||
| | | |||||
| Tel: 0845 0770 787 •
Fax : 0845 0770 788
|
|||||
| HP DesignJet plotter repair service uk Hewlett Packard design jet support & maintenance | |||||
